Raikko NANO BT Bedienungsanleitung Seite 7

Introduction
Dear customer, thank you for choosing a RAIKKO
ensure trouble-free use of your purchase, please carefully read
the introduction, safety instructions and warning.
Product includes
• 1 RAIKKO NANO BT Vacuum Speaker
®
• 1 charching and extension cable
• 1 carrying bag
Overview
1. On-off/play-back-pause/end call
2. Volume +/next track/answer call
3. Volume −/last track/mode
4. Charging/transfer jack
5. Connection cable
6. BuddyPlug
7. Microphone
12
product. To
®
Microphone
Opening the NANO BT Vacuum Speaker
Turn the speaker cover anticlockwise until the interlocking
completely unlocks. Hold the NANO BT Vacuum Speaker with
both hands to prevent the body springing out uncontrollably.
Either connect the headphone socket (3.5 mm) of the NANO BT
Vacuum Speaker to an audio source using the connection cable
that is rolled up in the base or establish a Bluetooth
Caution: Do not pull the open speaker apart: the integrated
spring expands the soundbox to the appropriate volume.
Switching on/connecting
Press and hold the on/off switch for at least 3 seconds. The LED
display then flashes blue (twice in quick succession). Activate
the Bluetooth interface on your device and search for possible
®
Bluetooth connections. Read your device's user manual for the
®
appropriate procedures. Choose the BT speaker from the list of
possible connections found. If you are asked for a pin to connect
via Bluetooth , enter "0000".
®
Operating modes
Press the mode button twice in quick succession to switch
between Bluetooth and cable functions. Using the Bluetooth
®
function, the LED display blinks twice in quick succession whilst
the display in cable mode is permanently lit up.
Volume
Set the volume using the volume control on your playback device.
connection.
®
®
13