Subwoofer Connection; Bluetooth Connection - Quadral breeze blue L Bedienungsanleitung

There is a connection field on the back of each box with colour-coded screw terminals for connecting up the speaker cable. Unscrew
the screw terminals and insert the stripped end of the cable into the hole that is now open. One wire is marked in colour or by shape in
the speaker cable. Screw this positive lead into the red terminal and the other lead into the black terminal. Hand-tighten the screws.
Now check that the connection to the active speaker is correct to ensure correct polarity. The marked wire goes to the (+) pole again
here and the other to the black (-) screw terminal.
5. S U B W O O F E R C O N N E C T I O N
Use a mono chinch cable to connect an active subwoofer to your breeze.
Sub Out has a low-pass filter. This ensures that only the very low signals are passed on to the subwoofer. It is not possible to reset the
crossover frequency on the breeze.
6. B L U E T O O T H C O N N E C T I O N
1. If you want to establish a new connection to a device, switch the breeze on and then switch over to your device's Bluetooth settings. Af-
ter a short search „quadral breeze blue L" will appear in the device list under available devices. The permanent connection will be made
as soon as you select the breeze.
2. The connection will be established automatically if the source has already been connected up to breeze blue L.
3. You can adjust the volume on your player or you can use the volume control (2) on the rear panel.
18
S C R E W T E R M I N A L S
!