Herunterladen Diese Seite drucken

Velleman MB01 Bedienungsanleitung

Led-panel "open / closed"

Verfügbare Sprachen

Diese Anleitung herunterladen

MB01

"OPEN / CLOSED" LED SIGN

LED-PANEEL "OPEN / CLOSED"

PANNEAU LED « OPEN / CLOSED »

PANEL LED "OPEN / CLOSED"

LED-PANEL "OPEN / CLOSED"

USER MANUAL

GEBRUIKERSHANDLEIDING

NOTICE D'EMPLOI

MANUAL DEL USUARIO

BEDIENUNGSANLEITUNG

1. Introduction

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm

the environment.

Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised

company for recycling.

This device should be returned to your distributor or to a local recycling service.

Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you very much for buying this LED sign. Please read the manual thoroughly before bringing this device into

service. If the device was damaged in transit, don't install or use it and contact your dealer.

Please check your set to see if the following items are included:

MB01

MB01 – "OPEN / CLOSED" LED SIGN

VELLEMAN

Seite 1 GEBRUIKERSHANDLEIDING NOTICE D’EMPLOI MANUAL DEL USUARIO BEDIENUNGSANLEITUNG MB01 – “OPEN / CLOSED” LED SIGN 1. Introduction To all residents of the European Union Important environmental information about this product This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment.
Seite 2 Unpack everything carefully. Insert the AC/DC adapter into the power input and switch the power button to “ON”. The LED sign will start glowing. Switch from CLOSED to OPEN and vice versa using the button. The MB01 is suited for indoor use only.
Seite 3 Si tiene dudas, contacte con las autoridades locales para residuos. ¡Gracias por haber comprado el MB01! Verifique si el aparato ha sufrido algún daño en el transporte antes de la puesta en marcha. Si es el caso, no conecte el aparato a la red y póngase en contacto con su distribuidor.
Seite 4 • El manual del usuario 2. Instrucciones Desembale todo cuidadosamente. Introduzca el adaptador CA/CC en la entrada y active el panel con el interruptor (ON). Conmute de OPEN a CLOSED y viceversa con el interruptor. Utilice el MB01 sólo en interiores. 3. Especificaciones Dimensiones...