Herunterladen Diese Seite drucken

Velleman FM9 Bedienungsanleitung Seite 5

Lautsprecherdock fur iphone/ipod mit fm-radio, uhr & alarm

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 18
5. Overview
Refer to the illustrations on page 2 of this manual.
A docking connector
B speaker (2x)
C power LED
D display
E source button (SOURCE)
F volume down button (VOL-)
G volume up button (VOL+)
6. Use
Refer to the illustrations on pages 2 and 3 of this manual.
The FM9 can receive power either via batteries (not incl.) or via the mains (adaptor included).
Note: when using batteries, the connected iPhone/iPod will not be charged.
Mains: plug the connector of the included mains adaptor into the DC input [N]. Make sure the
o
power switch [M] is in the OFF position and plug the adaptor into a suitable mains outlet.
Batteries: make sure the power switch [M] is in the OFF position and insert batteries in the
o
battery compartments [K] (refer to §7 for battery handling instructions).
Set the power switch [M] to the ON-position. The power LED [C] lights up.
General
Most functions are only available through the remote control; only a limited number are available on
the device itself.
Remove the plastic tab from the remote control prior to first use.
Press the TONE button to set the Volume, Bass and Treble. Use the volume up and down buttons (on
remote:
VOLUME
Press once to set the volume (0~40), the display indicates Volume.
o
Press twice to set the bass (-8 ~ +8, step 2); the display indicates Bass.
o
Press three times to set the Treble (-8 ~ +8, step 2); the display indicates Treble.
o
Note: the output volume can also be set directly using the volume up and down buttons (on remote:
VOLUME
Setting the time
Press the TIME button; the hour indication starts to flash.
Change the hour using the volume up and down buttons (on remote:
VOL- [F] / VOL+ [G]).
Press the TIME button again to confirm and move to the minutes setting.
Set the minutes with the volume buttons. When finished, wait ±7s for the seconds to stop flashing.
iPhone/iPod
Gently place your iPhone/iPod (not included) on the docking connector [A].
Press the power button on the remote control (
display [D] lights up blue.
Press the SOURCE button [E] until the display indicates iPod.
Press the MENU button to go to the iPod menu.
Use the
and
choose an item.
Press the play/pause button (
Shortly press the previous (
Press and hold the previous (
Notes:
An incoming phone call on your iPhone will mute the music being played.
It is possible to leave your iPhone in the docking station to answer the call.
FM radio
Press the SOURCE button [E] until the display indicates FM.
Extend the antenna [J] for better reception.
Shortly press the previous (
and hold for ±3s for auto-scan.
To store a radio channel (preset), press the SELECT button. Choose a preset location (01~20) with
the
and
buttons next to the SELECT button to store.
To retrieve a preset channel, press the
08.07.2011
; on station: VOL- [F] / VOL+ [G]) to change the settings.
; on station: VOL- [F] / VOL+ [G]).
buttons (next to the SELECT button) to scroll through the menu; press SELECT to
) to play or pause music.
) or next (
) or next (
) or next (
FM9
H standby button (STANDBY)
I snooze button (SNOOZE)
J FM antenna
K battery compartment (2x)
L external input (AUX)
M power switch
N DC input (7.5V)
) or the STANDBY button [H] on the station; the
) button to skip to the previous or next music track.
) button to fast forward or reverse within the track.
) button to adjust radio frequency by 0.1MHz. Press
or
button next to the SELECT button.
5
VOLUME
; on station:
©Velleman nv

Werbung

loading