zenpro SmartControl ZSC1 Anweisung Seite 18

2) After downloading the application connect to the
"SmartControl_SERIALNO" Wi-Fi network, provided by the
device.
3) Next press the "Search" button and wait till the device is
found. After successful search, use the yellow "Connect"
button.
CONNECTING THE ZENPRO DEVICE TO HOME WI-FI NETWORK
Connecting the Zenpro Unit to home router allows to control home
automation devices remotely through Internet. It also allows to
update the device software.
There are two ways to connect Zenpro ZSC1 to home network.
1) By the local Wi-Fi network
To connect ZSC1 to home network through Wi-Fi you have to open
the mobile app, go to "SETTINGS" -> "Network connections" ->
"Wireless network configuration (WLAN)". In the "Network mode"
menu check the "Connection to home Wi-Fi network". Next
"Choose Wi-Fi network" and type in the home Wi-Fi password if
it's set up.
"SmartConrol_SERIALNO" Wi-Fi network, and the mobile device
will disconnect. Than log your mobile device into the home
network, open the Zenpro app and search for the Unit. In case of
problems with finding the device home network, first wait couple
of seconds and try again. In case of problems press shortly the
"Reset" button on the back of the Unit. It will bring back the default
The ZSC1 device will stop broadcasting
18