Care And Maintenance - nedis KASC112BL Anleitung

POWER SUPPLY:
• 2x CR2032 lithium batteries included (incl.).
• When batteries are low, the display shows "Lo", please install fresh batteries.
OPERATION:
1. Place the scale on a level surface.
2. Press the "On/Off" button, the display shows "HELLO" and then "0 g".
3. Place your ingredients on the weighing platform, the weight is shown on
the display.
TARE FUNCTION:
1. Place a container on the scale, its weight is shown on the display.
2. Press the "Tare" button, the display show "0 g". Now add your ingredients
into the container, the weight is shown on the screen display.
MEASUREMENT UNITS:
Slide the selector at the bottom of the scale to the respective unit (g/lb) to
change from "grams" to "ounces".
OVERLOAD INDICATOR:
If the weight of your ingredients exceed 5 kg or 11 lbs, then the scale is
overloaded "Err" is displayed.
REPLACE BATTERIES:
• This appliance uses only lithium button cells CR2032.
• Clean the battery contacts and the contacts in the battery compartment
prior to the battery installation.
• Remove the batteries from the compartment if the kitchen scale is not
going to be used for a longer period of time.
• Leaking batteries must be replaced immediately.
• Remove used batteries with care.

CARE AND MAINTENANCE:

• For accurate results place the scale on a flat and level surface.
• Clean the scale with a damp cloth. Do not submerge the scale in water and
do not allow water or other liquids to enter the scale.
• Do not use chemicals to clean the scale.
• Do not place the scale close to electric appliances, as radiation may affect
the performance of the scale.
• Do not place or store the scale near heat sources or in a damp environment.
• Do not expose the scale to extreme heat.
• Do not attempt to weigh objects or ingredients heavier than 5 kg/11 lbs.
2
ENGLISH