Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
Q7: HOW TO CHARGE LAPTOP WITH JUMP
STARTER?
A: Turn the switch ON, choose proper adapter and voltage according
to your laptop (for example: if your laptop requires 19V, then press
POWER to shift 19V), then connnect your laptop input and jump
starter laptop output with adapter.
VEHICLE EMERGENCY STARTING STEPS
The plug connect the jump starter
Red clamp connect "+"
Black clamp connect "-"
Remove the clamps
from the jumpstarter.
Laptop output
Turn product switch to "ON".
Connect the clamp to
Start the vehicle.
the jumpstarter.
Remove the clamps
from the battery.
PRODUCT SPECIFICATION
• Battery capacity: 1OOOOmAh
• Charging lifetime: 500 times
• Output: 5V/2.1A, 12V/3.5A, 16V/3.5A, 19V/3.5A
• Input: 1 SV 1 A
• Starting current: 200A
• Peak current: 400A
• Work temperature: minus 20ºC to plus 60ºC
• Size: 155x75x32mm
• Net Weight: 422g
NOTICE
1. If not in use for longer periods turn off the main switch to maintain
the power.
2. If the starter is slightly hot during recharging or using, it is
normal, not a fault.
3. Recharging only at ambient temperature between below 20ºC to
above 60ºC. And keep starter away from fire, heat and water.
4. Please keep starter in dry condition, and away from corrosion
material.
5. Don't use the corrosive chemical to wipe starter, such as soap and
detergent.
6. If the starter appears abnormal in shape, leak or has an unpleasant
smell, please stop using immediately and disconnect all elec-
tronic devices.
7. Don't throw or apply physical shock to starter and never attempt
to disassemble it.
8. Keep starter away from children. The product is not a toy for
children to play with.
9. Never allow the cable clamps to touch or connect to same pieces
of metal so as to prevent physical injury and damage to starter.
Werbung
