Televes SFG2150 Bedienungsanleitung Seite 13

3
2
Device designed for carrying out attenuation and flatness tests
in I.F. installations that do not dispose of an input signal, together
with a Televés field strength meter H45 or H60 .
It disposes of a rotating knob which allows you to select all of the
operating modes.
4
1.- Output for pilot signals to the installation. Input for the current
from the installation to power the simulator.
2.- Connector to externally power the simulator via the DC adap-
ter.
1
3.- Rotating knob for selecting the different operating modes.
4.- Two-colour LED that indicates the type of signal in the insta-
llation.
13