About The Iotavx Integrated Amplifier Sa 3; Product Description; Front Panel; Rear Panel - IOTAVX SA 3 Bedienungsanleitung

About the IOTAVX Integrated Amplifier SA 3

The IOTAVX SA 3 Integrated Amplifier with Bluetooth is designed and built in-house with the same quality and
attention to detail we have been bringing to all our entire audio range.
With 50 Watts per channel, the ability to match with the IOTAVX PA 3 for additional power, as well as an array
of digital and analogue inputs including Phono (MM) and Bluetooth, the SA 3 is a truly versatile machine while
remaining elegantly simple to use.
Although the SA 3 is a well featured and is extremely flexible, its most defining characteristic really is the sound!
The premium quality Toroidal power transformer and discrete amplifier stage seamlessly deliver a beautifully rich
sound with very low noise (only 0.07% THD).

Product Description

Front Panel

1. Standby Indicator Light
When the power amplifier is in standby, the light will glow red. When the power amplifier is in operating mode it
will glow white. When the power amplifier has detected a problem (protection due to short on output for
example) the light will blink red.
2. Volume Control
Controls the volume level of all audio channels, as well as access to the various menu functions and adjustment.
3. Headphone Jack
Output audio signals for the use of listening with headphones.
4. VFD Display
A vacuum fluorescent display (VFD) is used to display all menu details and functions.

Rear Panel

1. Analogue Inputs
You have the option of using multiple analogue inputs namely PHONO (MM), LINE1, LINE2, LINE3, LINE4, LINE5.
2. REC OUT
This analog audio output is for connecting a recorder with an analog audio input.
3. PRE-OUT
If you want to connect to the IOTAVX PA3 power amplifier and use SA3 as a preamplifier, connect it to the PRE-
OUT jacks.
4. SUB-OUT
This is to connect an Active Sub-woofer.
SA 3 Owner Manual 5