Azusa URZ3397 Bedienungsanleitung Seite 12

Owner's manual
Connection
1. Turn off the power of amplifier.
2. Carefully to remove the insulating layer of the speaker's connection wire on both ends.
3. Tighten the ends of lead wire.
4. Rotating the terminals anticlockwise makes the thrum passing through the line ho-
les easily.
5. Rotating the terminals Clockwise to ensure the thrum connection is stable.
Notice: Please use the wire provided along with the speakers: speakers' anode (Red+)
are connected with amplifier's anode (Red+); speakers' cathode (Black-) are connected
with amplifier's cathode (Black-). Checking the thrum to make sure they are not connec-
ted with the chassis, and the anode and cathode are unconnected.
Specific connection method
Connect the main amplifier with vice speaker. Red is anode, and black is cathode. Using
the red and black wire to connect it, use one end of one red wire connected with "R+"
(Red) of the main amplifier, the other end connected with the red terminal of the vice spe-
aker. Equally, use one end of one black wire connected with "L-" (Black) of the main am-
plifier, the other end connected with the black terminal of the vice speaker.
Diagram 1
AC220V 50Hz
5 901890 007221
EN
This 2.0 active home theater system includes a main speaker with 2 channels built-in audio
amplifier and a vice speaker. It is easy to be connected.
Be sure to disconect the power of amplifier before connecting or disconnecting speakers.
12