Options - AEG FSE72710P Benutzerinformation

12 www.aeg.com
To improve the drying performance refer
to the XtraDry option or activate AirDry.
How to deactivate AirDry
Make sure the appliance is in user mode.
1. Press
• The indicators
are off.

7. OPTIONS

Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
Not all options are
compatible with each other.
If you select non compatible
options, the appliance
automatically deactivates
one or more of them. Only
the indicators of the still
active options are on.
7.1 XtraDry
Activate this option when you want to
boost the drying performance. With use
of this option, the duration of some
programmes, water consumption and
the last rinse temperature can be
affected.
The XtraDry option is a permanent
option for all programmes other than
and need not to be selected at
every cycle.
Every time
option is off and needs to be chosen
manually. In other programmes, the
setting of XtraDry is permanent and it is
automatically used in next cycles. This
configuration can be changed at any
time.
Activating XtraDry option deactivates
TimeSaver.
.
, ,
is activated, XtraDry
• The indicator
• The display shows the current
setting:
2. Press
= AirDry deactivated.
3. Press on/off to confirm the setting.
and
How to activate XtraDry
Press . The related indicator comes
on.
The display shows the updated
programme duration.
7.2 TimeSaver
The TimeSaver allows to reduce the time
of the selected programme.
The total programme duration decreases
by approximately 50%.
The washing results are the same as with
the normal programme duration. The
drying results can decrease.
This option increases the pressure and
the temperature of the water. The
washing and the drying phases are
shorter.
By default, TimeSaver is off, but it is
possible to activate it manually. This
option cannot be combined with XtraDry
at the same time.
How to activate TimeSaver
Press , the related indicator comes on.
If the option is not applicable to the
programme, the related indicator does
not come on or it flashes quickly for a
few seconds and then goes off.
The display shows the updated
programme duration.
7.3 ExtraHygiene
This option provides better hygiene
results by keeping the temperature at 70
°C for at least 10 minutes during the last
rinsing phase.
still flashes.
= AirDry activated.
to change the setting: