Ordering Replacement Parts; Cleaning And Storing; Notes On Environmental Protection / Disposal - Nakayama EC2345 Originalbetriebsanleitung

The saw chain can be re-sharpened by any dealer.
Do not attempt to sharpen the saw chain yourself
unless you have the necessary special tools and
experience.

9. Cleaning and storing

• Regularly clean the clamping mechanism by
blowing it out with compressed air or cleaning it
with a brush. Do not use tools for cleaning.
• Keep the handles free of grease so that you can
maintain a firm grip.
• Clean the device as required with a damp cloth
and, if necessary, mild washing up liquid.
• If the chainsaw is not to be used for an extended
period of time then you should remove the chain
oil from the tank. Briefly immerse the saw chain
and the cutter rail in an oil bath and then wrap
them in oil paper.
Caution:
• Always disconnect the mains plug before
cleaning the chainsaw.
• Never immerse the unit in water or other
liquids in order to clean it.
• Store the chainsaw in a safe and dry place out
of the reach of children.
10. Notes on environmental protection
/ disposal
The device must be properly disposed of
when it reaches the end of its service life.
Cut off the power cable to prevent it
being used by mistake. The device
must not be disposed of as domestic
waste. Instead, in the interests of the
environment it should be disposed of via a
designated recycling or disposal point for
electrical equipment. Please contact your
local authorities for information about proper
disposal of the device in your area. Packaging
materials and worn accessory parts should also
be disposed of at the designated recycling or
disposal points.
28

11. Ordering replacement parts

Please provide the following information on all
orders for replacement parts:
• Model/type of the tool
• Article number of the tool