Preparing The Device For Use - mantona Turnaround 360 Gebrauchsanleitung

5. Preparing the device for use
5.1 Charging the powerpack
• Plug the mains cable of the device into the jack on the device, then connect the
mains cable with the outlet socket of the electric power supply.
If the power of the powerpack is weak, 4 LEDs of the rotation indication will start
flashing.
NOTE
Compare the local electric power supply with the connection values of the
device. Should the connection values not match, please contact
info@walimexpro.de or phone +49 8432-9489-0.
NOTE
Use only the power supply unit that has been delivered with the device. Switch off
the device for charging.
5.2 Assembly
• Screw the mantona Turnaround 360 Automatic
tripod head on a tripod.
• Fasten your camera on the mantona Turnaround
360 Automatic tripod head.
NOTE
Ensure secure fastening of your devices.
15