Ais; Viewing Ais Vessels; Ais Windows - AdvanSea T.50 Anleitung

3-12 AIS

AIS is an Automatic Identification System for identification and localization of boat. AIS provide
a means for boats to exchange and share boat data including identification, position, course,
etc. This information can be displayed on the screen of you unit. AIS is intended to assist you
to monitor other boats movements to improve safety and prevent collision.
AIS functions require an optional AIS unit to be installed. Contact your nearest AdvanSea
dealer for more details or visit at www.advansea.com.
To activate AIS function:
1 Press and hold
2 Select Features then AIS.

3-12-1 Viewing AIS Vessels

When the unit is connected to AIS unit which
support NMEA0183 or NMEA2000, you can
check other vessel that are equipped with
AIS unit on the screen. To check AIS
information place the cursor on the AIS
object then AIS information displays at the
bottom of window.
① ① ① ① AIS equipped vessel
② ② ② ② Dangerous Vessel
③ ③ ③ ③ Projected Course
④ ④ ④ ④ AIS equipped vessel Data Box
⑤ ⑤ ⑤ ⑤ Range Rings

3-12-2 AIS Windows

To display the AIS windows:
1 Press , and select AIS icon.
2 Press and hold
two tabs: Vessels or Messages tab.
- Vessel: show you all the AIS equipped
vessel around you. (up to 200 vessels)
- Message: show you all the messages
related to safety from other AIS equipped
vessels.
Sorting Vessels
1 Press , select Sort by.
2 Select one of the options.
and select System Configuration icon.
to select one of the
Installation and Operation Manual
①
Displaying an AIS vessel on the chart
To overlay AIS equipped vessel on the chart
window:
1 Press or
want to display in AIS window.
2 Press and select Display.
Displaying AIS equipped vessel Details
1 Press or
wan to display full AIS detail in the AIS
window.
2 Press or press
More Info.
3 Press or
to select a vessel you
to select a vessel you
and select
to see more detail.
②
③
⑤
④
39