Remote Control Battery - Exibel BTX1500 Bedienungsanleitung

Remote Control
13. [ Standby ] On/Off (standby) power switch
14. [ MODE ] Select playback via Bluetooth
or AUX
15. [ LED OFF/ON ] LED light effects on/off
16. [ LED MODE ] Light effect mode selector
17. [ l◄◄ ] Return to previous track
18. [ ►ll ] Play/pause
19. [ BASS+ ] Increase bass
20. [ TREB+ ] Increase treble
21. [ BASS- ] Decrease bass
22. [ TREB- ] Decrease treble
23. [
] Switch off the sound
24. [ LED COLOUR ] Select colour of light
25. [ ►►l ] Advance to next track
26. [ VOL+ ] Increase volume
27. [ VOL- ] Decrease volume

Remote control battery

1. The battery in the remote control is covered with a film to prevent it from discharging
during storage and transport. This film needs to be removed before the remote
control can be used.
2. To change the battery, open the battery drawer by pressing in the spring catch and
pulling the drawer out. Follow the markings on the back of the remote.
3. Insert a new battery (CR2025). Make sure that the positive (+) terminal is facing
upwards, towards you. Note the polarity markings on the back of the remote
control and in the battery drawer to ensure correct insertion.
4. Slide the battery drawer back into the remote control.
Assembly
Securely screw the foot to the speaker using the supplied screw and washer.
Operating instructions
1. Plug the mains lead into a wall socket. The STANDBY indicator (2) will come on.
2. Press [ STANDBY/ON ] on the speaker or [
the speaker on.
3. The speaker will come on in the latest selected mode, BLUETOOTH or AUX.
4. Press [ STANDBY/ON ] on the speaker or [
switch the speaker off.
STANDBY
13
14
LED
15
OFF/ON
16
17
18
19
BASS+
20
21
BASS-
22
] on the remote control to switch
] on the remote control again to
5
23
MODE
LED LED
24
MODE COLOUR
25
26
TREB+ VOL+
27
TREB- VOL-