Philips HD4686 Bedienungsanleitung Seite 15

Signal
Two temperature
lights flash alternately.
The kettle beeps
once.
The kettle beeps
twice.
Problem
I cannot set the
desired
temperature.
I try to switch on
the kettle but it
switches off
automatically.
The kettle switches
off
automatically when
it is in the keep-
warm mode.
Meaning/solution
The kettle is out of order. Contact an
authorised Philips service centre or the
Customer Care Centre in your country.
The water has reached the set temperature.
The kettle may have switched off at the end of
the keep-warm period (30 minutes). The kettle
may also have switched off because there is too
little water in it. Always fill the kettle with at
least 0.5 litres water.
Solution
The current temperature of the water in the
kettle is probably higher than the temperature
you want to set.
The kettle has boil-dry protection and
automatically switches off when there is too little
water in it. You may need to put more water in
the kettle (at least 0.5 litres).
There may be too little water in the kettle.
Always fill the kettle with at least 0.5 litres water.
The kettle keeps the water warm for 30 minutes
and then switches off automatically. To keep the
water hot longer, press the keep-warm button
again.
EnglisH
15