Language:english - Maxima MAX-OXY Gebrauchsanleitung

Once the control panel is back in service mode, the display
will show:
8:01 Holiday

The holiday mode is automatically cancelled when a
regeneration is manually initiated!
PROGRAMMING INSTRUCTIONS -
BASIC SETTINGS

Before entering the programming mode, make sure that
the appliance is in service mode.

In case no button is pressed in a period of 5 min, the
control panel will automatically return to the service mode;
any changes made will NOT be saved!
1. Press the scroll button and hold it for 2 sec until the
display shows:

Language:English


Press the up or down
language.
2. Press the scroll button again; the display will show:
Set time:

Press the up or down
day.
3. Press the scroll button again; the display will show:
Rech. daily: ON

Press the up
activate/deactivate the daily recharge of the
compressed air chamber.
4. Press the scroll button again; the display will show:
Interval:4 Days

Press the up or down
of days between regenerations.
5. Press the scroll button again; the display will show:
Exit

Press the up or down
into the NOVRAM® and exit the programming mode.
ELECTRONIC CONTROL PANEL
button to set the
8:01
button to set the time of
or down button to
button to set the number
button to save the settings

The filtration capacity of the appliance mainly depends
on the daily water usage and the iron/manganese content
in the water; many other factors may also have a significant
impact on the filtration capacity. Therefore it is
recommended to regenerate the appliance on a regular time
basis. In most applications a regeneration every 3 to 4 days
should be sufficient.

In case of excessive:
-
iron/manganese content,
-
water consumption,
-
amounts of organic matter or suspended solids,
it is recommended to lower the regeneration interval to 1 or
max. 2 days.
Page 9
EN - English