Resetting The Headset - Ericsson HBH-10 Bedienungsanleitung

HBH10-R3A-PRINT.BOOK Page 13 Tuesday, October 3, 2000 2:26 PM
5. Scroll to HBH and press
you want to add the Headset to the list of paired devices.
6. Enter the Headset passkey and press
When you get confirmation that the Headset has been added
to the list, and the Headset light flashes green, the pairing has
been successful.
Using Another Device or a Non-Ericsson Phone
The device or phone must have Bluetooth capability and support
the Headset profile.
To pair the Headset with another device
1. Activate the Bluetooth function in the other device if necessary.
To do this, please refer to the user documentation for the device.
2. With the Headset turned off, press and hold the Headset button
for up to 10 seconds until the indicator light on the Headset
flashes green and red. Make sure the Headset and the phone
are not too far apart.
3. Initiate Bluetooth pairing in the other device to pair it with the
Headset. To do this, please refer to the user documentation for
the device.
4. When asked, enter the Headset passkey and press
is successful, the Headset indicator light flashes green.

Resetting the Headset

You may want to reset the Headset to its default settings, if, for
example, you forget your Headset passkey. This also clears all
current pairings.
To reset the Headset
1. With the Headset turned off, press and hold the Headset button
for up to 10 seconds until the indicator light on the Headset
flashes green and red. Then release the button.
2. Press and hold the button again until the Headset beeps and is
turned off. The Headset has now been reset.
. Press again to confirm that
Y E S Y E S
.
Y E S
Y E S
Using Your Headset
. If pairing
13