Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Programming : prog new
Programming may be done for each day or for a
group of days. In this case instructions are common
to several days.
Days: 1 = Monday, 2 = Tuesday, 3 = Wednesday...
7 = Sunday.
1. Select the prog mode using menu.
Validate with enter.
The number of free program steps is displayed for
two seconds.
2. Scroll days from 1 to 7 using
+
desired day (s) using enter. Press
flickers.
3. Confirm days group using
enter
-
or
- Allows reprogramming the group of
days, if necessary.
4. Using
+
or -, select the state of the instruction:
On or Off.
Validate with enter.
5. Enter state change hours using
Validate with enter.
6. Enter state change minutes usingde
Validate with enter.
Program the other instructions of the group of days
by repeating operations 3 to 6.
At the end of programming return to auto mode
using menu.
It is possible to add a program step to the program
set up using prog new mode.
Modification or clearing of a
program step: prog modif
To modify a program step:
1. Select the prog mode using menu.
Validate with enter.
2. Select the modif mode using
+
Validate with enter.
The number of remaining program steps appears
for 2 secondes.
The first program step appears.
3. Scroll all recorded program steps one by one by
repeat pressure of
enter
key. Flickering fields
(state, hours, minutes) can be modified using
-
keys.
Validate with enter.
When ok flickers, press
+
or
-
groups of days to be modified.
At the end of programming End will be displayed
and the product will reverse back to auto mode.
To remove a program step:
1. Select the prog mode using menu.
Validate with enter.
2. Select the modif mode using
Validate with enter.
3. Select the group of days with
kers).
Validate with enter.
4. Scroll state, hours and minutes for the various
program steps of days group using enter.
5. To remove a step, stop in flickering On or Off
position while pressing
until Clear displays.
Validate with enter.
At end of clearing, turn back to auto mode using
menu.
Setting time and day
Winter/summer time change
1. Select the mode
Validate with enter.
2. Modify the day, month, year, the hour and the
or -, select the
minutes using
+
until ok
Valider avec
ter).
key.
The time switch next suggests the winter/summer
time changes
3. Select the type of change desired using
.Validate with enter.
The type of change depends on the geographical
zone.
+
or -.
Types available:
+
or -.
type according defect
*
The change always takes place between 2:00 and
3:00 a.m.
For user setting of daylight savings
time
Repeat operations 1 to 3.
or -.
4. Select USER.
5. Enter the day then the month of the date of chan-
ge of the summer time (+ 1 hour) with
Validate with enter.
6. Enter the day then the month of the date of
change of the winter time (- 1 hour) with
+
or
-.
Validate with enter.
to scroll days or
The switch clock will apply the changes every year
on the same day (e.g. day 7) of the same week (e.g.
week 13) regardless of the date set.
+
or -.
+
and
-
(Ok flic-
+
and
-
simultaneously
using menu.
+
or -.
enter
(to switch to next parame-
.
+
:
+
or -.
4
Override
Output state is On:
Pressing repeatedly
1
pressure: temporary waiver. Off and
st
The next program step will let you
return to the auto mode.
2
pressure: permanent override. On and
nd
permanent. This override must be
cancelled manually.
3
pressure: permanent override. Off and
rd
permanent. This override must be
cancelled manually.
4
pressure: return to the auto mode.
th
Output state is Off:
Pressing repeatedly
1
pressure: temporary waiver. On and
st
The next program step will let you
return to the auto mode.
2
pressure: permanent override. On and
nd
permanent. This override must be
cancelled manually.
3
pressure: permanent override. Off and
rd
permanent. This override must be
cancelled manually.
4
pressure: return to the auto mode.
th
or
-
Connection diagram HWAT-L
+
or
www.tycothermal.com
-
flash.
are
are
-
flash.
are
are
Werbung
