Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Time switch
ref. QWT-05
Electronic time switch
1 channel electronic time switch
weekly cycle
FR
GB
DE
IT
Product presentation
Reset
program reset
• the program may be completely cleared by simul-
taneously pressing the 3 following keys: menu,
enter
and
. The time and the date will be
kept.
total
• pressing simultaneously the +, -,
enter
keys lets you clear the entire contents
of the product.
Following a total reset it is necessary to reset the
time and day of the device.
Locking
To prevent all undesirable actions, the keyboard
of the time switch may be locked by pressing the
enter
and
keys until
flashes.
Unlocking is done in the same way.
➀
menu: selection of operating mode
auto: mode of running according to the
program selected.
prog new: for programming mode.
prog modif: to modify an existing program.
: checking of the program.
: modification of time, date and selection of
the winter/summer time change mode
➁
+
and -: navigation or setting of values.
-: in auto mode, selection of overrides or
waivers.
➂
enter: to validate flashing information on
display.
➃
: to return to the previous step.
You may return into auto mode at any moment
using menu.
If no action is taken for one minute, the switch
returns into auto mode.
Display
To check the daily profile set up without the risk
of modification or deletion, select the mode
using
menu
and press enter.
Monday is displayed as well as the daily profile.
Two options available for display:
• pressing repeatedly
In this case only the first daily step is displayed
menu
and
as well as the daily profile.
• Pressing enter: to scroll programming steps.
Dimensions
58
+
or -: lets you shift days.
35.8
43.8
3
Product delivered with current time and date set.
Automatichange of winter/summer time
Programming for day or group of days.
56 program steps On, Off.
Permanent overrides On or Off (
on).
Temporary overrides On or Off (
Display bar graph of daily profile.
Keyboard locking possible
Programmable with power off.
Technical specifications
Electrical characteristics
Supply voltage:
Frequency:
Power consumption:
Output:
1 changeover volt free contacts
Maximum load:
AC1:
DC1:
Cos
= 0,6
.
φ
Incandescent lighting:
Halogen lighting 230 V:
Compensated fluorescent tubes // (max. 45 μ F)
Non compensated fluorescent tubes, compensated
in series:
Compact fluorescent lamps:
Minimum current:
AC1:
DC1:
Galvaniinsulation between power supply
and output = 4 kV
Degree of pollution:
Functional characteristics
Programming capacity:
Minimum time between 2 steps:
Running accuracy:
Operating reserve:
provides 5 years of backup.
The product is set into standby state (display
switched-off) after 1 minute with power off. It
switches back into auto mode as soon as power
is back or when pressing any key.
Protection degree:
Environment:
• Operating temperature:
• Storage temperature:
Connection:
• Flexible capacity:
• Rigid capacity:
Made in France
Application example (HWAT-L)
Monday - friday
Saturday - sunday
.
permanent light
flashing).
.
230 V AC ± 15%
50/60 Hz
max. 6 VA to 50 Hz
μ 16A 230 V~
μ 4A 12 V
μ 10A 230 V~
2300 W
2300 W
400 W
1000 W
500 W
100 mA 230 V~
100 mA 12 V
standard
56 steps.
1 minute
± 1,5 sec./24h
lithium battery
IP 20
-5 °C to +45 °C
-20 °C to +70 °C
1 to 6 mm
2
1,5 to 10 mm
2
Werbung
