AUDIOropa pro:ton SP-100R Bedienungsanleitung Seite 13

How to use
2.2 Power ON / OFF
Press and hold the power button for about 2 se-
conds to switch the device on.
To switch the device off after use: Press the power
button again for 2 seconds. The indicator LED will
blink 5 times in red during shutdown.
2.3 Reception
After switching the device on, the indicator LED
briefly briefly lights up in violet.
In case of a connection to an active SP-100M
microphone transmitter, the indicator LED will
slowly blink with blue colour. If no connection
exists, the LED will blink red.
2.4 Pairing with SP-100M
Switch the microphone transmitter SP-100M on.
Hold the receiver SP-100R in proximity to the
transmitter and switch it on. The receiver will au-
tomatically connect to the transmitter.
Please note: The according SP-100M must be set
as »MASTER«! After successfully connecting, the
indicator LED will slowly bink blue.
English 13