Care And Transport; Cleaning And Drying - GeoMax ZAL300 Gebrauchsanweisung

Field adjustment
Product and
Accessories
Damp products

Care and Transport

After long periods of storage inspect the field adjustment parameters given in
this user manual before using the product.

Cleaning and Drying

• Blow dust off lenses and prisms.
• Never touch the glass with your fingers.
• Use only a clean, soft, lint-free cloth for cleaning. If necessary, moisten the
cloth with water or pure alcohol. Do not use other liquids; these may attack
the polymer components.
Dry the product, the transport container, the foam inserts and the accessories
at a temperature not greater than +40°C / +104°F and clean them. Do not
repack until everything is dry. Always close the transport container when using
in the field.
ZAL300 | 4
EN