Replacing The Fuse; Technical Specifications - Dimavery TGA-30 R Bedienungsanleitung

Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.

5.1 Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuseholder on the rear panel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.

6. TECHNICAL SPECIFICATIONS

Power supply:
Maximum Power:
Input impedance:
Frequency range:
Speaker:
Dimensions (LxWxH):
Weight:
Please note: Every information is subject to change without prior notice. 14.11.2006 ©
TGA-30R
230 V AC, 50 Hz
30 W
20 mV
40 Hz - 15 kHz
10"
470 x 440 x 215 mm
17 kg
18/18
26362030_V_1_0.DOC