Dimavery TGA-30 R Bedienungsanleitung Seite 16

4. DESCRIPTION
4.1 Features
Powerful 30-Watt RMS Guitar Workstation with 3 x 12AX7 vacuum tube
• 3-band-equalizer for fine-tuned Clean and Overdrive sound
• Input via 6.3 mm jack socket
• Standby mode
• Ajustable Reverb effect
• Rotary control: Gain, Treble, Bass, Middle, Volume, Reverb, Presence
• Insert facility for external effects devices
• 2 x 616GC Tube Amp
• 10" loudspeaker
• Rugged housing with plastic corners
• Colour: goldbrown
4.2 Front panel TGA-30R
1. INPUT Socket
Here, you can connect your guitar via balanced 1/4" stereo jack.
2. GAIN Control
This control determins the degree of distortion in the Overdrive channel.
3. FAT Button
Press the Fat button to select the Clean or Overdrive channel.
4. TREBLE Control
Used to boost or lower the upper frequency range.
5. BASS Control
Used to boost or lower the LOWs.
6. MIDDLE Control
Used to boost or lower the midrange frequencies.
7. VOLUME Control
With the Volume control, you can adjust the output signal.
8. REVERB Control
With the reverb control you can can gradually add reverb to your overall sound.
9. PRESENCE Control
Used to cut or boost the higher midrange frequencies.
10. POWER AMP IN/OUT Sockets
The TGA-30R features a serial path for external effects such as your DIMAVERY Wah-Wah-Pedal. Connect
the Power Amp In socket to the output of your external effects device and the Power Amp Out socket to the
input of your effects device.
11. STANDBY Switch
The Standby switch is used in conjunction with the Power switch to warm up the amplifier before use and to
prolong the life of the output valves. When powering up the amplifier always engage the power switch first
and let the valves reach the correct operating temperature (approx. 2 min.) before you activate the Standby
switch.
26362030_V_1_0.DOC
16/18