Blomberg DKP 2010 X Bedienungsanleitung Seite 5

- WARNING: It is a possible fire hazard if the metal grease filters are not cleaned and
the charcoal filters replaced regularly.
8 FITTING THE CHIMNEY
- To fit the (longer) upper chimney A, place the top edge of the chimney over the bracket C
as illustrated in fig. 8 and secure the chimney using two of the 2.9mm self tapping screws
provided.
- The distance in the height between the fixing holes X1 and X2 is determined by the
height of the upper chimney A.
- To fit the (shorter) lower chimney B, apply slight force to the two rear edges to increase
the width of the apperture, then sleeve the chimney B over the chimney A as illustrated
in fig. 9.
OPERATION
- The cooker hood functions are controlled by a series of slider or push button switches
mounted on the front of the hood and control the worktop lighting and fan motor speeds.
- This cooker hood will not remove steam.
1 - SLIDER SWITCHES
- A switch controls the wotktop lighting - ON/OFF.
- A switch controls the fan speeds - OFF/ON-1-2-3.
- The red neon lamp illuminates when the motor is switched ON .
2 - PUSH BUTTON SWITCHES
- A switch controls the worktop lighting - ON/OFF.
- A button switches the motor OFF/ON at the low speed setting.
- A button switches the motor to the medium speed setting.
- A button switches the motor to the high speed setting.
- The red neon lamp illuminates when the motor is switched ON.
3 - SPEED SETTINGS
- 1/Low should be selected when simmering or when using only one pan.
- 2/Medium should be selected for cooking when using up to four pans.
- 3/High should be selected when frying or cooking food with a strong odour.
3