Peavey VYPYR SANPERA II Handbuch Seite 25

1. Expression Pedal
This pedal controls the overall volume of the amplifier. To enter TUNER MODE, simply depress the toe area of the expression pedal
to activate the internal switch. While in TUNER MODE the pedal will continue to control the volume of the amplifier, allowing you
to choose whether or not you hear the note you are tuning.
NOTE: You can swap the functionality of the two on board Expression pedals by entering CALIBRATION MODE.
2. Main/AUX Indication LED
These LEDs indicate whether the pedal is in MAIN MODE or AUX MODE. Depress the toe area of the expression pedal to switch
between modes.
Left pedal: Volume/Tuner Right pedal: Wah/Pitch Shift
3. Bank Down
This button allows you to scroll downward through a list of BANKS that contain four PRESETS each. The button also serves to help
scroll through characters while naming PRESETS.
4. Bank Up
Same as item 3, only it scrolls in the opposite direction.
TIP: You can hold down the Bank Up and Bank Down buttons to scroll quickly.