Troubleshooting - Hoist Fitness LeMond pilot II Bedienungsanleitung

No Display on Console
1. Press any key to bring the console out of sleep mode.
2. Ensure that the batteries are installed properly in the
console and transmitter. If they are, install fresh batter-
ies.
3. Verify that the cadence transmitter and console are
paired correctly (see Appendix).
4. Call our Customer Service department at
for assistance.
No Heart Rate signal displayed
1. Ensure that your chest strap is worn correctly, and that
there is moisture under the electrodes of the chest strap.
2. Relocate the RevMaster bike away from any equipment
that could potentially interrupt the radio frequency
signal, such as a DVD player or television, etc.
3. Enure that there is at least 36 inches between bikes in a
group exercise class setting.
4. Call our Customer Service department at
for assistance.
RPM or HR does not change
1. Press [CADENCE] repeatedly to toggle between
instantaneous (INS), average (AVG), and maximum
(MAX) values.
2. Press [HR] repeatedly to toggle between instantaneous
(INS), average (AVG), and maximum (MAX) values.
Page 22

TROUBLESHOOTING

- -