Herunterladen Diese Seite drucken

Miele WTV 501 Umbau- Und Montageanweisung Seite 24

Wasch-trocken-verbindungsbausatz

Werbung

Produktgruppe 19
24 von 24
Danger!
Risk of electric shock, appliance damage when disassembling:
When the WTV is disassembled, the washer lid is not adequately sealed, due to the residual holes. The washer can no longer be
operated safely.
Before the washer can be operated again without the WTV, the lid must be sealed in one of the following ways:
Seal the holes in the lid using silicone, or
Install a new lid on the washer. (Lids are available through Miele dealers.)
Risk of electric shock when lid is removed:
Removing/installing the lid may only be done by a trained technician in strict accordance with national, state and local codes.
Before starting any service work, disconnect the appliance from its power source.
am
16.10.2014
Diese Unterlagen dürfen ohne unsere Genehmigung weder vervielfältigt noch Dritten zugänglich gemacht werden. Eigentumsrechte vorbehalten.
Umbau- und Montageanweisung
M.-Nr. 09351981

Werbung

loading

Diese Anleitung auch für:

Wtv 502