Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CAUTIONS
General safety information for the use of electrical devices:
To avoid injury from fire or electric shock, please ensure compliance with safety
instructions when using this device. Please read the instruction carefully and make
sure that you have understood it well. Keep the manual near the equipment to be
able to read it at any time. Always use current sources connected to the ground and
providing the necessary voltage (indicated on the label on the device). If you have any
doubt, let an electrician check that your outlet is properly grounded. Never use a da-
maged power cable. Do not open the unit in damp or wet environment, or if you are
wet yourself. Protect the unit of solar radiation. Use the device in a protected locati-
on to avoid damaging the equipment or endangering others. Make sure the device is
able to cool and avoid placing it too close to other devices that produce heat. Before
cleaning, disconnect it. Use a soft damp cloth for cleaning. Avoid using detergent and
make sure that no liquid enters the unit. No internal element of this device needs to
be maintained by the user. An opening of the device without our approval leads to a
loss of warranty.
General safety information for the use of the device:
•
The user manual should be kept close to the device and should always be acces-
sible for the users. Instruct your employees how to use the device properly.
•
Make sure the hot air can circulate well and place the device more than10 cm
away from walls and other electrical devices. Aerate well the working area.
•
Do not place the device close to combustible materials.
•
Clean the device regularly to avoid a durable encrustation of dirt.
TECHCNICAL DETAILS
Modell
Voltage (V)
Rated current (A)
Power (W)
Output voltage (V)
Output current
Display precision
Voltage stability with load
Recovery time
Ripple noise
Temperature coefficient
Work temperature
Storage temperature
Work relative humidity
Storage relative humidity
8
EN
DE
6108 S-LS-9
230 ~ 50Hz
6
15
0 – 15
0 – 1
0,1 V
0,1 A
≤ 0.01%+2mV
≤ 100µS
≤ 1mVRMS
≤ 300PPM/⁰C
-10⁰C – 40⁰C
-20⁰C – 80⁰C
< 90%
< 80%
USAGE PURPOSE
Power supply is designed for work in electric / electronic equipment repairs services
as well as in the laboratories and production facilities. Also it is designed for service
works related to different kind of mobile phones and various communications equip-
ment.
Any damage resulting from a non-conform use of the device is payable by the user!
PRINCIPLE OF OPERATION
Assembly:
4
5
3
1.
2.
3.
2
4.
5.
6.
1
7.
9
8.
8
9.
7
6
OPERATION:
1.
Connect the device to the power source AC 230V.
2.
Turn on the device with the main switch (1), the voltage display will show "000".
3.
Connect the load to the appropriate terminals (+) and (-).
4.
Set the desired output voltage value using knob (3).
5.
Output current indicator (2) will show current value.
6.
RF power measurement: place the mobile phone near the device, RF indicator (5)
will show the radio signal strength:
EN
main switch
output current meter
output voltage adjustment knob
output voltage display
RF power indicator
positive output terminal
negative output terminal / negative test ter-
minal
positive test terminal
output voltage / test voltage switch
9
Werbung
Inhaltsverzeichnis
