Control Buttons; Control Button States - Fujitsu bay projector Handbuch

Ports and operating elements

Control buttons

Button

Control button states

The different states of the control buttons provide additional information about the status of the Bay
Projector.
Blinking
Green, solid
Blinking
Orange, solid
Blinking
Orange, blinking
Fujitsu Technology Solutions
Description
Laser On/Off button.
To switch the projector on and off, see chapter "Switching on the Bay
Projector".
Brightness button.
To control the brightness of the image.
By pressing the Brightness button you can switch between two brightness
levels (depending on the power status of your notebook).
When your notebook runs on battery power, the brightness is lower.
Keystone buttons (top, bottom).
► To shrink the upper part of the image, press the Top Keystone button:
► To shrink the lower part of the image, press the Bottom Keystone button:
Description
Room temperature is about to grow too
high, please pay attention.
The Bay Projector is to hot. Let it cool
down before putting it into operation
again.
A problem has occurred. Retract the
projector part.
If the problem continues and the button
does not stop blinking, contact your
Fujitsu Service Desk.
English -
5
5