Herunterladen Inhalt Inhalt Diese Seite drucken

Klarstein 10031981 Bedienungsanleitung Seite 20

Glaskonvektor
Vorschau ausblenden Andere Handbücher für 10031981:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
OPERATION
Starting
1.
Take out the heater from the carton carefully. Please save the carton for off-season storage
2. Make sure the power switch is in the OFF position before plugging it in.
3. Ensure the heater is fully assembled according to the Mounting Guide.
4. It's better not to use the same electric outlet with other high wattage electrical appliances in order to avoid
overloading your circuit.
Turn on
Plug in the unit and turn on its power switch, it is in standby mode with buttons (13) and (14) / (15) and (16)
light on, and in ten seconds, the unit is on, with power button(13) light on and display showing current area
temperature.
Time setting
Press buttons of setting (16) and (15) together for 3s, week indicator flashes and time setting is activated.
Select a day by (14) or (15) ; press (16) then Hour Indicator (5) flashes, again by (14) or (15) buttons to set Hour.
Again press (16) for minute setting ( minute indicator (7) flashes ), set the desired minute by buttons (14) or
(15), after that press button (16) and save all setting..
Temperature setting
Press button (16). Temp indicator (17) flashes and its setting is activated.
Press (14) or (15) to set the temperature and (16) to save it, or just leave it 5s, setting is saved automatically.
Select heating level
(14) button runs low heat setting ( indicator
or through shifting button ( on the remote control to chootse high or low heat. .
Child-lock setting
Press both (14) and (15) for 3s, child lock indicator" []" is on, system is locked and no setting could be done.
After 2 s, display shows again area temperature. In this mode, it only shows child lock indicator when any
button is pressed.
Methods to unlock: Press both (14) and (15) for 3s, the unit is unlocked and any setting could be done again
Display buttons activation
Normally display buttons light are off when unit is working, touch the panel area below temperature, they
are on again.
light on), button runs high heat setting (indicator
light on),
20

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

10031982

Inhaltsverzeichnis