Inhaltsverzeichnis; Description - Greenlee 7904SB QUICK DRAW 90 Handbuch

Table of Contents
Description ..................................................................... 2
Important Safety Instructions ...................................... 3-4
Specifications ................................................................. 5
Capacity And Draw Stud Selection Guide ..................... 6
Operation .................................................................... 7-9
Maintenance ........................................................... 10-12
Troubleshooting ...................................................... 13-14
Exploded View ............................................................. 31
Parts List ...................................................................... 32
Draw Studs and Accessories ....................................... 33

Description

The Quick Draw 90™ is a self-contained hydraulic
punch driver. The Quick Draw 90™ and Greenlee
punches, dies, and draw studs form a complete system
for punching holes of various shapes and sizes through
mild steel, aluminum, fiberglass and plastic. Slug-Splitter
punches, dies and studs are available for punching all
of these materials and stainless steel.
Various Quick Draw™ kits are available:
7904SB Quick Draw™ Hydraulic Punch Driver, draw studs
7906SB Quick Draw™ Hydraulic Punch Driver, draw studs,
conduit-size punches and dies
7904E Quick Draw™ Hydraulic Punch Driver and draw studs
7904ESB Quick Draw™ Hydraulic Punch Driver, draw studs, Pg
size punches and dies
7904ISO Quick Draw™ Hydraulic Punch Driver, draw studs,
ISO size punches and dies
Greenlee Textron / Subsidiary of Textron Inc.
7904SB/7906SB Hydraulic Punch Driver
KEEP THIS MANUAL
Safety
Safety is essential in the use and maintenance of
Greenlee tools and equipment. This instruction manual
and any decals on the tool provide information for
avoiding hazards and unsafe practices related to the
use of this tool. Observe all of the safety information
provided.
Purpose
This instruction manual is intended to familiarize personnel
with the safe operation and maintenance procedures for
the 7904SB/79006SB Hydraulic Punch Driver.
Keep this manual available to all personnel.
Replacement manuals are available upon request
at no charge.
and
Greenlee Textron.
®
2 4455 Boeing Dr., Rockford, IL 61109-2988 815/397-7070
are registered trademarks of