Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The "Filter" programme fi lter operating mode is selected in the TP (Transport stream processor) sub-menu.
The "TP" transport stream processor is selected using the "<" and ">" buttons and the sub-menu is called up using the "Sub-menu"
button
. The "Filter" programme fi lter is selected using the "<" and ">" buttons and is activated/deactivated using the "+" and "-" buttons.
The settings available are: Filter "on" / "off".
This sub-menu can be exited only when the cursor is on the "OID on/off" parameter.
To do this, use the "<" and ">" buttons to select "OID on/off", and press the "Sub-menu" button
When programme fi lter "on" is selected a "P" appears at the top right of the main menu.
*
UFO378/TP-Oktal1
Filter
OID
not lit
"Transport stream processor" sub-menu
To process the programme list for the programme fi lter, press the "Sub-menu" button
fi lter. This reads in the current channel table from the transponder. A progress bar appears while this is being done.
As soon as the channel unit has successfully determined this information, the sub-menu for adjustment is displayed.
*
UFO378/TP-Oktal1
T
/
001
/
Das Erste
Compile
"Filter" sub-menu
The fi rst line shows the type of the channel that was selected, together with the number of the channel and the number of channels on
the transponder.
T = TV channel
Channel no. (e.g. 001)
of the selected channel
The second line shows the channel name, together with its fi lter status (+ or -).
The default setting for the status of the channels that are displayed is "-", i.e. no programmes are transmitted when the programme
fi lter is switched on, but the programme list is not processed.
The "Compile" button in the third line starts the compilation of the programme list, which then becomes effective.
The selection of the channels carried over is performed using the "+" and "-" buttons, where the status "+" means the channel will be
carried over and the status "-" means it will be removed. The "Status" parameter is selected using the "<" and ">" buttons.
The settings become effective when the fi lter table is compiled. This is done using the "<" and ">" buttons; select the "Compile"
parameter and use the "+" or "-" buttons to initiate the compilation of the channel table. After the fi lter table can been constructed, the
channel fi lter is switched on automatically (fi lter "on").
The programme fi lter can be processed even if it is not activated ("off"). This means that the operation can be checked
Note:
or temporarily deactivated without waiting times or reprogramming.
If the programme list was not processed but the programme fi lter was switched on, the previously saved list remains
active, or in the absence of any list no programmes are transmitted.
*
UFO378/TP-Oktal1
T
/
001
/
Das Erste
Compile
"Filter" sub-menu
on
42 %/51 %
00h
009
/
R = Radio channel
/
Quantity (e.g. 009)
of the channels on the transponder
009
/
*
....
When changing to the "Filter" sub-menu
*
*
T
/
-
Das Erste
Compile
D = Data service
*
-
....
9 / 10
to return to the main menu.
Channel
information
is read in
on the "Filter" parameter in the programme
UFO378/TP-Oktal1
001
/
009
"Filter" sub-menu
Programme fi lter
being compiled
On compiling the programme fi lter
*
/
-
Werbung
