Safety Instructions / Warning - Feig Electronic OBID ID ISC.PRH100-A Montageanleitung

   
OBID i-scan
2. Safety Instructions / Warning - Read before start-up !
•
The device has to be used only for the purpose designed by the manufacturer.
•
The operation manual has to be stored available at any time and has to be handed over to
each user.
•
Unauthorized changes and the use of spare parts and additional devices which have not been
sold or recommended by the manufacturer may cause fire, electric shocks or injuries. Such
measures will lead to exclusion of any liability by the manufacturer.
•
The liability-prescriptions of the manufacturer in the issue valid at the time of purchase are
valid for the device. The manufacturer is not legally responsible for incorrect, unsuitable
manual or automatical setting of parameters for a device or the incorrect application of a
device.
•
Repairs can only be executed by the manufacturer.
• Installation-, operation- and maintenance procedures should only be carried out by qualified
personnel.
•
Before opening the device, the power supply must always be interrupted. Make sure that the
device is without voltage by measuring. CAUTION! The fading of an operation control (LED) is
no indicator for an interrupted power supply or the device being without voltage!
•
Works at the device and its installation have to be executed according to the national legal
requirements and local prescriptions.
•
When working on devices the valid safety regulations must be observed
FEIG ELECTRONIC GmbH
Installation
Page 19 von 29
ID ISC.PRH100-A/-USB
M10501-3de-ID-B.doc