Herunterladen Inhalt Inhalt Diese Seite drucken

Button Functions - Thermokon WRF06 LCD 2V Datenblatt

Multifunktions-raumbediengerät
Inhaltsverzeichnis

Werbung

1.2 Output 0-10V
Temperature:
Set point:
1.3 Digital Input
Function:

1.4 Button Functions

1.
The background illumination of the LCD is switched-on by pushing any menu button.
2.
By a one-time push of the buttons
3.
By a further pushing of the buttons
4.
Taking over of set point adjusted: button
5.
Termination: button
1.5 Configuration Menu:
The configuration menu enables the user to make changes of the basic settings afterwards. The
configuration menu (both outer buttons) is opened for a time of approx. 5s by a concurrent actuation of the
Esc
buttons
and
. The following properties can be changed: minimal set point adjustment, maximal set
point adjustment, basic set point (after reset). Furthermore, it is possible the re-calibrate the sensor by
entering an offset if measuring inaccuracies occurred.
2 Notice for Order Placements
For an easy and smooth order processing, we would like to ask you to indicate the following adjustment
options on your order sheet.
Display of room temperature with or without mantissa (with mantissa)
basic set point (standard 22 °C)
Set point adjustment – upper limit (Standard 3 °C)
Set point adjustment - lower limit (Standard -3 °C)
Set point change per button actuation (Standard 0,5 K)
Function of digital inputs (Standard: no function)
Digital inputs for make-and-break contacts
o
Window contact
o
Dew point sensor
o
Message (text message)
o
Failure message (failure symbols and text message)
o
Texts for display messages (one-line: 7 signs / two-line: 12 signs)
o
Texts for display messages (one-line: 7 signs / two-line: 12 signs)
WRF06LCD_2V_Typ3_01_eng.doc
Erstellt am 21.08.2008
Function descrition
WRF06LCD_2V Typ3
0...+50°C / 0...10V=, max 10 mA, (terminals 7-10)
0...+50°C (configurable range of adjustment) / 0...10V=, max 10 mA, (terminals 6-10)
2 digital, dry inputs for activation of text messages or for activation of window
contact symbol, dew point symbol
or
or
Esc
change of set point is canceled.
the mode for set point change is entered.
the set point can be changed.
or 10 s no button actuation
FB-KE: 07
Rev 1
Seite 2 von 2

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis