Alessi WA08 “coffee.it” Bedienungsanleitung Seite 22

• Do not immerse the boiler in
water. (fig. 16)
• Clean it with a damp cloth and
dry it immediately with a soft, dry
cloth.
• After cleaning, make certain that
the connectors and sockets are
completely dry.
• Make certain that the safety valve
works correctly and does not
leak. Replace any worn parts with
original spare parts and have all
work done by an expert.
• Never wash the inside of the
espresso maker with soap: doing
so will alter the coffee's flavour.
g. 14
Use water only.
• Carefully rinse the filter funnel,
upper body, upper filter plate,
reduction filter, and rubber gasket
under running water. Periodically
clean the inside of the column
with a brush. Every once in a
while, check that the holes in the
upper filter plate are open. If they
are clogged, clean them carefully.
ig. 15
• Always place the espresso maker,
disassembled, in a dry and well-
ventilated place, away from
sources of humidity, especially in
case of infrequent use.
Pantone 415
Cleaning the boiler
Cleaning the upper body
Cleaning the power supply base
• DO NOT immerse the power
supply base in water (fig. 17).
Fig. 16
• Clean it with a damp cloth and
• Do not use products containing
• Re-wind the power cable
19
normal soap, and dry it with a
soft, dry cloth.
abrasive substances that could
damage the surface finish.
manually into its housing without
pulling it excessively, so that it
forms multiple coils. (fig. 18)
Fig. 17
Fig. 18