Led Indicator - Pioneer SE-C8TW Bedienungsanleitung

9. LED indicator

<Earphone units>
Operation
When not connected to a
Bluetooth device
Pairing mode
When connected to a Bluetooth
device
During recharging
<Charging case>
Operation
During recharging
Fully charged (remaining battery
power: 100%)
Remaining battery power: About
75%
Remaining battery power: About
50%
Remaining battery power: About
25%
<Checking the remaining battery power>
• You can check the remaining battery power
by gently tapping the charging case to turn on
the LEDs.
• Subjecting this product to strong forces or impacts may cause damage to
the exterior appearance, a loss of performance, or a malfunction or internal
damage.
• If the LEDs do not light, charge the batteries because there is no remaining
battery power.
For the charging procedure, see P.4.
LED indicator
LED flashes blue once every second.
LED alternately flashes blue and red.
LED flashes blue once every three seconds.
LED lights red.
LED indicator
LED flashes white once every second.
4 white LEDs are lit.
3 white LEDs are lit.
2 white LEDs are lit.
One white LED is lit.
9
En