CreamWare Pro-12 Klangbox Benutzerhandbuch Seite 14

Options for Amp- and Filter Envelope
ADR
Pressing this button automatically sets the sustain to
zero. This is a good way to switch rapidly between a
sustaining and a percussive sound without having to
change the sustain level each time. ('ADR' is another
feature not available on the original 1978 synth.)
Release
This button determines whether 'release' is on or off.
When release is switched on, notes die away after
releasing the key at a rate set by the amplifier re-
lease control.
Volume
This controls the master volume of the synthesizer. It also sets the
volume of the signal routed to the effects section, so you can use it
to keep effects at a workable level, avoid distortion when using the
flanger effect with lots of feedback, etc.
14