CashTester CT 332 SD Bedienungsanleitung Seite 6

3.4 Alert messages
Self-test error code display
The detector automatically performs a self-test after each power on. If one of the following alert
messages is displayed, usually it is because the sensor is blocked by banknotes or dust. Please use a
brush or a piece of soft cloth to clean the dust on the sensor or remove the banknotes and then restart
the machine.
Code
P01
P02
P03
P04
P05
P06
P09
P10
E01
E02/ E03
E04/ E05
E06
E07
E08
E09/E10/E11/E12
E14
E20
Description
The upper left IR sensor is not working properly.
The upper right IR sensor is not working properly.
The below left IR sensor is not working properly.
The below right IR sensor is not working properly.
The feeding sensor is not working properly.
The size sensor is not working properly.
The right passing sensor is not working properly.
The left passing sensor is not working properly.
Length feature not (correctly) detected
Magnetism feature not (correctly) detected
IR feature not (correctly) detected
Thickness not (correctly) detected
Slant note detected
Hologram feature not (correctly) detected
Paper quality not (correctly) detected
Cannot judge denomination
Note jammed or blocked
Cashtester CT 332 SD
- 6 -