Inhaltsverzeichnis
Werbung
REACHING THE CAMERA THROUGH THE APP
Open the app, press the camera and press the camera image. The camera connects
to the network and you can now see and hear what is happening. If you want to talk
through the camera, hold the microphone button while talking. Release the button
when you want to listen. Tap the gear button to access settings such as time, date,
motion alarm etc. Press the camera to see what the material recorded on the SD card.
RESET THE CAMERA
Reset the camera by pressing and holding the reset button on the back of the camera
for about 3 seconds (using a needle). It is important to remove the "old" camera app
and reload it. The password is now reset to 123.
TECHNICAL DATA
Resolution
Sensor
Voltage
Wi-Fi frequency
SD card
Image angle
Wi-Fi standard
Ambient temperature
For declaration of conformity please visit Electia's website
Art: 11 250
Electia_manual_A6_EL-IP.indd 13
720P
Hi3518E
DC 5V 1A
2.4 GHz
Max. 32GB
75 degrees
802.11 b/g/n
-10C - +55C Humidity 55%
www.electia.se
2017-09-11 10:00
Werbung
Inhaltsverzeichnis
