Denon DJ Axis 8 Benutzerhandbuch Seite 2

User Guide (English)
Introduction
Box Contents
Axis Loudspeaker
Power Cable
Support
For the latest information about this product (system requirements, compatibility information,
etc.) and product registration, visit denondj.com.
Setup / Connection Diagrams
You can set up your Axis loudspeaker in one of two ways:
Important: Please also see the following
•
Flat: Set the loudspeaker directly on a flat, stable surface (the floor or a low, sturdy table).
You can stack multiple Axis loudspeakers in a column, but make sure that all of them are
of the same model (Axis 8 or Axis 12) and that each loudspeaker's feet are placed firmly
in the 4 sockets of the unit beneath it.
•
Pole-Mounted: Carefully lift the loudspeaker and place the 36 mm hole in its bottom
panel over a standard 35 mm pole or speaker stand.
See the following examples of how to integrate the loudspeaker into your setup.
Note: Items not listed in
Example 1: 1 loudspeaker with vocal microphone and media player
Dynamic
microphone
Smartphone,
tablet,
MP3 player,
etc.
Connect a dynamic microphone to Input 1 using an XLR or 1/4" (6.35 mm) TRS cable. Make
sure the Line/Mic Selector is set to Mic. Connect a media player (smartphone, tablet, MP3
player, etc.) to Input 2's RCA connectors using a 1/8"-to-RCA (3.5mm-to-RCA) cable.
Note: Use only dynamic microphones with the loudspeaker unless you are also using an
external phantom power supply.
2
User Guide
Safety & Warranty Manual
Important Safety Instructions
Introduction > Box Contents
chapter.
are sold separately.
Power