Chal-Tec 10005776 Bedienungsanleitung Seite 13

Pairing the headset with Bluetooth mobile phone
Please make sure your mobile phone has Bluetooth function that can be used. Specific pairing procedures
may vary with different mobile phone. Please refer to your mobile phone manual for further information.
Steps as follows:
1. Please keep the headset and mobile phone in the range of 1 meter when pairing.
2. Make the headset enter into pairing mode (Please refer to "how to enter into pairing mode").
3. Start the Bluetooth function of mobile phone and search the Bluetooth devices. After searched,
select "BTH015"in the Bluetooth device list.
4. According to indication, enter password or PIN No:"0000",and press the key of" Yes" or "confirmed".
5. After successful pairing, select "BTH015" in the Bluetooth device list, and press "connect".
6. After successful connecting, the blue LED of the headset quickly blinks twice or three times every 4
seconds.
Notes:
 If the pairing is not successful, please switch off headset firstly, and then re-pair according to the
step 1～6 mentioned above.
 After pairing is successful, paired devices will remember each other. Unless pairing information is
deleted because of new pairing, no need to pair when use next time. The headset can remember 8
paired devices, when paired devices exceed 8 paired devices, the first one will be replaced.
 If you want to pair the headset with other devices, please pair it with the new device according to
steps 1～6 mentioned above.
Pairing the headset with Bluetooth transmitter
You can enjoy music wirelessly through connecting headset with stereo Bluetooth transmitter. Here take
BTT0010 (single sale) iPod general Bluetooth transmitter for example. Pairing steps as follows:
1. Keep the Bluetooth transmitter and headset in the range of 1 meter when pairing.
2. Make the headset enter into pairing mode (refer to "How to enter into pairing mode).
3. Turn on the Bluetooth transmitter. It will search Bluetooth device automatically and start pairing.
4. When the headset requests PIN No, the Bluetooth transmitter need to respond "0000" automatically.
5. After successful pairing and connecting, the blue LED of headset quickly blinks twice every 4
seconds.
Notes:
1. The pairing password of BTH015 is "0000", so, the headset can't pair with the Bluetooth transmitter
which pairing password is not "0000".
2. If the pairing is still not successful after trying several times, please refer to your Bluetooth
transmitter manual carefully.
Multi-pair
The headset can connect with two devices at most. One is the mobile phone with HFP profile, another is the
devices with A2DP profiles. If you want to finish the pairing of several Bluetooth devices, please refer to the
following steps:
1. Firstly, pair the headset with Bluetooth transmitter (refer to "pairing headset with Bluetooth
transmitter).
2. Switch off the Bluetooth transmitter.
3. Pair and connect the headset with the Bluetooth mobile phone (refer to "pairing headset with
Bluetooth mobile phone").
4. Restart Bluetooth transmitter, it will connect with headset automatically.
Notes:
 After successful pairing with several Bluetooth devices, the paired devices will remember each other.
Unless pairing information is deleted because of new pairing, otherwise make mobile phone and
headset set up hands free connection next time, and re-start the Bluetooth transmitter, then the
connection of several devices can be performed.
 For the mobile phone which supports the HSP and A2DP at the same time. It may set up connection
with HSP and A2DP simultaneously. At this time, start Bluetooth transmitter may not connect with
the headset again.