Herunterladen Inhalt Inhalt Diese Seite drucken

How To Use; Operation - Chal-Tec 10005776 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Charging the headset
First time charging
Before you use this Bluetooth headset, please charge the battery of BTH015 fully.
Next time
When you hear three warning tones of "DONG" every 20 seconds, at the same time, the red light blinks two
times. It means the battery is low power and need to be charged. There are two types of charging as below:
A. Charging the battery with travel charger
Step1: Plug the travel charger into standard AC power outlet.
Step2: Connect the travel charger with the charging port of the headset.
When the red light is on, the headset is charging.
When the red light is off, the headset is charged fully.
It takes about 3 hours to charge the headset fully.
B. Charging the battery with USB cable
Step1: Insert USB charging cable into USB port of PC.
Step2: Connect charging cable with the charging port of headset.
When the red light is on, the headset is charging.
When the red light is off, the headset is charged fully.
It takes about 3 hours to charge the headset fully.
Note:
Choosing travel charger or USB cable depends on different countries or areas and actual demands.
Switching on/off
Function
Switch on
Switch off
Note:
In order to save power, the headset will automatically switch off if no devices can be connected within 5
minutes after switching on.
Pairing the headset with Bluetooth devices
How to enter pairing mode
Function
Enter pairing mode
Note:
The pairing mode will last 2 minutes, If the headset still can't pair with any Bluetooth devices after 2
minutes, it will switch into standby mode automatically.

Operation

Press the MFB button for 3-5 seconds,
and release it till the blue LED is on
Press the MFB button for 3-5 seconds,
and release it till the red LED is on
Operation
Make sure the headset is off. Press
and hold MFB button for 6-7 seconds,
and release it till the red and blue
LEDS blink alternately

How to use

Blue LED is on for 1
second
Red LED is on for 1
second
Red and blue LEDs
blink alternately.
LED indicator
LED indicator

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis