Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Read all instructions before use.
Do not attempt to open casing.
Before binding it is advisable to carry out a test to familiarise yourself and to make sure that your
machine is working correctly.
1. Insert the plug into the socket, press the "on" button, the red (wait) lamp will light up and start the
warm-up of the machine.
2. In approximately 1-2 minutes the green (ready) lamp will light up and a signal sound informs you
the machine is ready for use.
3. Check the thickness of the paper to be bound, and select a suitable binding cover.
4. Place the papers to be bound in the cover and place the complete document into the binding slot
over the heating plate.
5. Press "push" button, the red wait lamp will light up and green lamp will be off.
6. In about 40 seconds, the green lamp will light and a signal sound indicates the binding is finished.
7. Press around the edge part of the cover with a handkerchief after taking it out of the machine.
8. The document must now be set on the cooling stand (I) for about one minute to allow the adhesive
to set.
The machine has a warranty of 2 years (the warranty is not applicable if the machine has been used
for an inappropriate purpose).
Specifications of Thermal Cover :
Thickness
1.5 mm
3 mm
4 mm
6 mm
8mm
Weight.....................................................................................................................0.85 KGS
BINDING MACHINE
S
N
AFETY
OTICE
Do not bind more paper than advised.
O
I
PERATING
NSTRUCTIONS
W
ARRANTY
T
D
ECHNICAL
Sheet volume
1-10 Sheets
11-30 Sheets
31-40 Sheets
41-60 Sheets
61-80 Sheets
ATA
3
Werbung
