General Inspection; Technical Specifications; Disposal Instructions - Tack life RPRS01A Bedienungsanleitung

1. Keep the ventilation slots of the tool unclogged and clean at all times to prevent overheating of the
2. engine. Regularly clean the tool's air vents with compressed dry air.
Regularly clean the machine housing using a soft cloth, preferably after each use. If the dirt does not
come off, use a soft cloth moistened with soapy water. Never use solvents such as petrol, alcohol,
ammonia water, etc. These solvents may damage the plastic parts.
This machine has been designed to operate over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper machine care and regular cleaning.
If the supply cord is damaged, it must be replaced by the manufacturer or a qualified electrician in order to
avoid a hazard.

General Inspection

1. Regularly inspect all mounting screws and ensure that they are properly tightened.
2. Regularly clean the air vents of the tool.
Cleaning:
Wipe clean with a dry cloth. Do not use solvents, water or chemicals to clean your power tool.
●
● Do not immerse any part of the grinder in liquids.
● Keep the motor ventilation slots clean. Keep all working controls free of dust.
Storage:8
Store the reciprocating saw in a safe, clean, and dry location out of the reach of children.
Save this instruction manual for future reference.

Technical Specifications

Model No.:
Mains Voltage:
Wattage:
No Load Speed:
Cutting Depth of Wood
Cutting Depth of Metal
Blades Included:
Manual Version 1.0, Issue Date: 08/2015

Disposal Instructions

Tools that are no longer usable should not be disposed of with household waste but in an
environmentally friendly way. Please recycle where facilities exist in your area. Check with
your local council authority for recycling advice.
Recycling packaging reduces the need for landfill and raw materials. Reuse of recycled
material decreases pollution in the environment. Please recycle packaging where facilities
exist. Check with your local council authority for recycling advice.
PRS01A
230V/50Hz 120V/60Hz（7A）
850W
0 – 2,800/min
115mm
6mm
1 x Blade for Wood
1 x Blade for Metal
- 08 -