Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
the desired position – fig.
the lever in the desired position and wait until a distinct click is heard.
II.2 Inserting of automotive seat belts
The child restraint can be used only in vehicles featuring three-point seat belts with a
retractor, certified by ECE as per Regulation 16. Pull out the full length of the seat belt,
insert its waist part through the base of the seat
er located on both sides of the child seat – belt path –
Fasten the seat belt buckle. The chest part of the car belt should be inserted in the following
way (see the user's manual label showing the way to fasten the belt on both sides of the baby
chair):
•
3
– press the green safety button upwards –
fig.
– move the grey safety grip to the right –
•
4
– unlock the blockade by pressing –
fig.
–
place the seat belt through the opening behind the seat belt blocking mecha-
nism –
;
4
•
5
– move the grey safety grip to the left –
fig.
– press the red safety button of the child seat down –
•
6
– the shoulder part of the seat belt is fastened;
fig.
•
7
fig.
–
firmly pull the seat belt upwards to activate the seat belt blocking mechanism;
•
8
fig.
– put the restraints horizontally;
•
9
– once again pull up the safety belts;
fig.
•
10
fig.
– place the restraints vertically and safely fix the child restraints on the seat.
Verify that the belts are not twisted or damaged and that they are properly tensioned.
Attention!
•
The red button must be always in.
•
Each time we change the restraints position to horizontal –
the safety belt has to be pulled up –
II.3 Removing the child restraints
To remove the restraints from the car:
•
3
fig.
– put the green safety button upwards –
– move the grey safety handle to the right –
•
4
fig.
– release the belts locks by pressing it –
– remove the breast safety belt from the lock;
•
remove the hip belt from the restraints' base;
•
unlock the safety buckle of the safety belt.
III. SAFETY SEAT HARNESSES
III.1 Locking and unlocking the harnesses
The buckle of the harnesses comprises 3 parts: 2 side parts and 1 central – fig.
should be put one on another – fig.
1
–
, simultaneously pulling the seat forward – fig.
1
,
3
12
fig.
13
–
, and when joined, slide them into the central part
1
9
–
fig.
2
(see:
red
color, also the oval stick-
red
color).
,
1
;
2
,
5
;
6
11
fig.
.
,
1
;
2
,
3
1
–
. Lower
2
– the breast part of
13
. Side parts
Werbung
Inhaltsverzeichnis
