Operation; Super Function; Switching Off; Temperature Regulation - JUNO JCG08820S9 Benutzerinformation

OPERATION

Control panel
Power indicator light
1
Temperature regulator
2
Super light
3
Switching on
Connect the appliance to the main power
supply.
1. Turn the Temperature regulator
clockwise to a medium setting.
The power indicator light will light up and a
sound will signal for 2 seconds.
If the temperature inside the
appliance is too high, the Alarm
light will blink and the sound
signal alarm will turn on.
2. Push the Super switch and the sound
signal alarm will get off.
3. Push the Super switch once again and
the Super light will light up. The
appliance will start to operate.

Switching off

Turn the Temperature regulator to the "O"
position and a sound is on only for 2
seconds .
The power indicator light will switch off.

Temperature regulation

The temperature is regulated
automatically.
1. Turn the Temperature regulator toward
lower settings to obtain the minimum
coldness.
1 2 3 4
4
5
2. Turn the Temperature regulator toward

Super function

The Super function accelerates the
freezing of fresh food and, at the same
time, protects foodstuffs already stored
from undesirable warming.
To activate this function press the Super
button.
The Super indicator appears.
This function stops automatically after 52
hours.
You can deactivate the Super function
before its automatic end by pressing the
5
Super switch and alarm reset switch
Alarm light
higher settings to obtain the maximum
coldness.
A medium setting is generally
the most suitable.
However, the exact setting
should be chosen keeping in
mind that the temperature
inside the appliance depends
on:
• room temperature,
• how often the door is
opened,
• the quantity of food stored,
• the location of the appliance.
19