Maintenance - Milwaukee BTM Originalbetriebsanleitung

TECHNICAL DATA
Voltage.......................................................................................................3 V
Weight with battery .............................................................................22.58 g
Battery Type ..................................................................................CR2032
Battery Life ................................................................................................1 yr
Recommended Ambient Operating Temperature ......................-30°C to 60 °C
Signal Range ........................................................................................≥ 30 m
Protection Class .................................................................................. IP67
WARNING! Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric shock, fi re and/or
serious injury.
Save all warnings and instructions for future reference.
SAFETY INSTRUCTIONS BATTERY
Do not leave batteries within the reach of children.
Install batteries according to polarity (+ / –) diagrams.
Properly dispose of used batteries immediately.
Battery acid may leak from damaged batteries under extreme load or extreme
temperatures. In case of contact with battery acid wash it off immediately with
soap and water. In case of eye contact rinse thoroughly for at least 10
minutes and immediately seek medical attention.
This appliance is not intended for use by persons (including children) with
limited physical, sensory or mental capabilities or insuffi cient experience and/
or knowledge unless they are supervised by a person who is responsible for
their safety or have been instructed by them in the safe use of the tool.
Children should be supervised in order to ensure that they do not play with
the tool.
4 ENGLISH
SPECIFIED CONDITIONS OF USE
The TICK™ is designed to track tools and equipment using the ONE-KEY™
App.
Do not use this product in any other way as stated for normal use.
EC-DECLARATION OF CONFORMITY
Hereby, Techtronic Industries GmbH declares that the radio equipment type
BTM is in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address: http://
services.milwaukeetool.eu
COINCELL BATTERY
Before fi rst use, remove the plastic tab from between the battery and
contacts. Discard the plastic tab and replace the cap. Remove the lear
protective backing from the back of the TICK™.If the TICK™ will not be used
for a long time, remove the battery as a protection against corrosion.
ONE-KEY™ APP / ACCOUNT SET UP
1. To download the ONE-KEY™ app, visit the App Store or Google Play from
your smart device.
2. Create a User Name and Password and log in to a ONE-KEY™ account.
3. Bluetooth and Location Services must be enabled on your mobile device.
4. Location Services must be enabled in the Settings section of the App.
ACTIVATING THE TICK™
1. Select or add a new item in "Inventory" to be tracked using the TICK™.
2. Select the red "Associate Tick" button on the Inventory Item Detail screen.
3. Follow the instructions on the screen.
4. Select "Start Scan". The App will scan for TICKs in range. If there are too
many in range, move the others at least 3ft. away.
5. Once the App has paired a TICK™ with the Inventory Item, tracking can
begin.
NOTE: If the device receives a sharp blow or impact, it may need to be paired
again.
INSTALLING THE TICK™
WARNING! Do not secure in such a way as to impede the safe use of the
product. Do not attach on or near the following:
• vents
• moving parts
• safety notifi cation
• guards
• hand holds
• switches or controls
• areas exposed to sparks or heat
Before using screws or rivets, ensure the space behind the placement is
clear.

MAINTENANCE

Clean with a damp, soft cloth.
Never use aggressive cleaning agents or solvents.
SYMBOLS
Please read the instructions carefully before starting the
machine.
One-Key Symbol.
Do not dispose of electric tools together with household waste
material.
Electric tools and electronic equipment that have reached the
end of their life must be collected separately and returned to an
environmentally compatible recycling facility.
Check with your local authority or retailer for recycling advice
and collection point.
European Conformity Mark
ENGLISH 5