Menu - Receiver And Transmitter - ComfortAudio Comfort Contego R800 Bedienungsanleitung

Menu - Receiver and transmitter

Press and hold the Menu/OK
button for a short moment to
access the menu:
Choices displayed on the
receiver:
Back Language
Pairing Key lock
You select the function by navigating
up or down with the arrow buttons
To make a selection, press Menu/OK
To return, also press Menu/OK
Radio range and channels
The aerials for the transmitter and receiver are built in. The range is
up to 30 meters. This can vary depending on the kind of environment
you are in.
Like all radio transmitters Comfort Contego communicates on special
channels. If you use two transmitters on the same channel there will
be an interference. Other electronic equipment can also interfere with
the radio transmissions.
The channel that you use in your country is perhaps not permitted
abroad. Always get in touch with your hearing aid provider in your
country in order to find out which channels are permitted in different
countries.
12
Menu/OK
Receiver Transmitter
Choices displayed on the
transmitter:
Back Line in
Channel Language
Pairing Key lock
Channel settings
The transmitter and receiver are set on the same channels when you
receive the product. The number shows which channel the receiver
is set on and both receiver and transmitter must be on the same
channel. To change channels choose Channel in the menu and press
OK, navigate between the channels by using the arrows up and down.
To choose a channel press OK.
If you change channel on the transmitter the receiver must be on
and within the transmitters range to follow the channel switch.
Pairing
In order to use the equipment, it must be paired (from the beginning
they are already paired). Press Menu key on both transmitter and
receiver. Scroll to Pair and press OK. Press Pair in the next menu.
The unit will display "Wait for receiver/transmitter". Press OK on the
transmitter. The units will pair and display "Pairing complete".
Line in
You can choose to use an external sound source, the equipment is
set on "Line in" from the beginning.
Language
Select the language with the arrows. Press OK.
Key lock
Choose "Lock Keys" in the menu selection and press Menu/OK to
lock the keys. To unlock them press the up and down arrow keys
simultaneously.
13