Remote Controller; Changing The Bulb; Operation - prologue 919202-UK Bedienungsanleitung

Remote controller

27. [ POWER ON/OFF ] On/Off
28. [ RADIO ]
29. [ SNOOZE ]
30. [ LIGHT DOWN ] Decrease light intensity
31. [ – ] Decrease volume
32. [ TUNE DOWN ] Tuner –
33. [ SLEEP ]
34. [ NATURE ] Nature sounds
35. [ LAMP ] Lamp
36. [ LIGHT UP ] Increase light intensity
37. [ + ] Increase volume
38. [ TUNE UP ] Tuner +
Changing the remote control batteries
1. Remove the battery holder.
2. Insert one CR2025 battery with
the text side up.
3. Replace the battery holder.

Changing the bulb

1. Loosen the screw on the left side of the device and remove the lamp shade.
2. Remove the old bulb.
3. Replace the light bulb with a new one.
4. Replace the lamp shade.
5. Replace the retaining screw securely.

Operation

Lamp
1. Insert 2 × AAA/LR03 batteries.
2. Connect the mains lead.
3. Press [ LAMP ] to turn the wake-up lamp on or off. The lamp will display a light
intensity icon once it is turned on.
4. Adjust the light intensity using [
27
28
29
30
31
32
] or [ ]. There are 18 settings to choose from.
4
33
34
35
36
37
38